nRF5 SDK for Mesh v3.2.0  08c60f6
Simple OnOff model

This model implements the message based interface required to set the 1 bit value on the server. More...

Modules

 Simple OnOff Client
 
 Common Simple OnOff definitions
 Types and definitions shared between the two Simple OnOff models.
 
 Simple OnOff Server
 

Detailed Description

This model implements the message based interface required to set the 1 bit value on the server.

This implementation of a simple OnOff model can be used to switch things on or off by manipulating a single on/off state. The intention of this model is to have a simple example model that can be used as a baseline for constructing your own model.

Do not confuse the simple OnOff model with the Generic OnOff Model specified in the Mesh Model Specification v1.0. The Generic OnOff Model provides additional features such as control over when and for how long the transition between the on/off state should be performed.

Note
When the server has a publish address set (as in the light switch example), the server will publish its state to its publish address every time its state changes.

For more information about creating models, see Creating new models.

Model Identification

Company ID: SIMPLE_ON_OFF_COMPANY_ID
Simple OnOff Client Model ID: SIMPLE_ON_OFF_CLIENT_MODEL_ID
Simple OnOff Server Model ID: SIMPLE_ON_OFF_SERVER_MODEL_ID

List of supported messages:

Simple OnOff Acknowledged Set.

Simple OnOff Get.

Simple OnOff Set Unreliable.

Simple OnOff Status.